Features
The Pentek PS1 water filters reduce extra fine dirt, sand, sediment, silt, rust particles, and scale particles. The Pentek PS1 water filter is resistant to chemicals and corrosion. The PS1 filter cartridge is designed for purity, bacteria resistance, and chemical resistance. The Pentek PS1 spun fibers form a true gradient density from outer to inner surfaces. The Pentek PS1 replacement water filter will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. The coreless strength of the Pentek PS1 water filter cartridge is achieved by sintering the many fibers into a solid matrix. NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The Pentek PS1 water filter is the same as the Ametek PS1, Everpure DEV910908/DEV9109-08/910908/9109-08, Bunn ED-S-1/SS-10, Cornelius COR105/COR120, Cuno CFS110, EcoLab 9320-1135, Manitowoc K-00069/K-00173, NuCalgon 4712-87, PureMark PFS105, Selecto 101-230, Shurflo SF31-SEDs/F5-052-00 water filters. The Pentek PS1 filter is a 1 micron extra fine sediment water filter cartridge made of spun bonded polypropylene. Pentek PS1 water filters are manufactured from 100% pure polypropylene. The Pentek PS1 water filters can be used on chlorinated or non-chlorinated water supplies. The Pentek PS1 water filter cartridges fit in whole house water filter systems and Reverse Osmosis Systems. The Pentek PS1 is Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
  • Genuine OEM Product

SPECIFICATIONS

Used In BrandsPentek
Manufacturer's IdPS1 -10
UPC051678014432
Advertised Size (in)10 x 2-1/2
Actual Size (in)9 3/4 inches (length) x 2 3/8 inches (outside diameter)
Actual Size (cm)24.77 x 6.0325
MediaSpun Wound Polypropylene
Primary Filter MediaPolypropylene
Filter Life (gallons)8,000
Filter Life (liters)30,283.28
Filter Life (months)2 months
Micron Rating (Nominal)1
Operating Temperature (°F)40 - 145
Operating Temperature (°C)4.4 - 62.8
Flow Rate (gpm)5
Flow Rate (lpm)18.927

CONTAMINANTS
Reduces the following contaminants:
  • The PENTEK-PS1 does not reduce fluoride
  • Particulates
  • Sediment